Vacuum systems

bg-separatore-centrale

To maximize a drainage system’s performances it is fundamental to have a vacuum system able to equate similar performances. For this reason, MTK supports its customers in the process of accurately sizing the various components that are part of the vacuum and auxiliary systems.

separatore (2)

Separators

To ensure a constant ongoing efficiency of vacuum pumps and fans, it is important to correctly proportion these components to ensure a high separation efficiency between water and air.

valvole VRV-AF (3)

VRV-AF valves

The three-way automatic valve was designed to enable one to regulate the vacuum of the entire drainage in a timely and accurate manner.

To facilitate maintenance, the valve was realized with a simple and sturdy design.

The valve consists of an entirely stainless steel body, a high torque strength rotary actuator and a positioner with an integrated 24V DC powered encoder.

The shutter can also be cleaned automatically.

interfaccia sistema di controllo

Control system

The system is designed to be easily accessible and intuitive.

Each element composing the vacuum system – from the automatic valves to the pumps management and the liquid ring water – can be easily controlled.

The system allows all control parameters to be changed and adjusted in order to optimize vacuum.

The system is realized so as to be expandable at any time and it can be used either as a stand-alone system or connected to any existing DCS already present in the paper mill.

It is also possible to upload production formulas in the system.

vuotometro

Vacuum gauge

The vacuum gauge is installed on each draining box subject to vacuum, then connected to the fan if the box is installed in the low-medium vacuum area, or connected to the pump if the box is installed in the high vacuum area.

The vacuum gauge is installed both on the operator side – to ensure that the operator can easily read the vacuum value inside the box – and on the engine side, between the separator and the vacuum regulation valve.

Trasduttore di pressione

Pressure transmitter

The pressure transmitter is installed on the motor side before each automatic valve.

The transmitter consists of a sensor installed along the pipeline of each draining box subject to vacuum and it is able to instantly and continuously measure the vacuum values inside the pipeline, thus forming, with the MTK control valves and the control panel, an automatic vacuum regulation loop in order to improve machine performance and optimize consumption.

icona-contattaci

For more information about ORADOC products






    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.